Dalca Dining Chair Black with Black Frame
- Description
- Features
- Specification
- Dimensions
- Warranty
- Shipment Contains
- FAQs
Pull up a chair at the Dalca a softly curved dining chair in black textured fabric, grounded on a slim matt black steel frame. At 59.5 cm wide by 57 cm deep, with a seat sitting 47.5 cm off the floor, it pairs with a standard-height dining table and suits a formal dining room or a modern-dark kitchen setup.
Upholstered in soft textured fabric with a curved backrest and generous seat. Supported by a sleek matt black powder-coated steel frame and legs, with foam and strapping cushioning. Fully assembled.
Curved backrest, generous seat
The backrest curves gently around the shoulders, and the seat pad runs the full width of the chair. Foam-and-strapping construction gives everyday support without feeling boardroom-firm.
Matt black powder-coated steel frame
The four-leg frame is matt black powder-coated steel slim in profile, dark in finish, and the tonal match to the black upholstery reads sharp and architectural.
Black confident and formal
Monochrome black reads confident against pale timber, stone, or marble table tops. A grown-up choice for a formal dining room or a high-contrast modern kitchen.
- Curved backrest and generous seat in soft textured fabric
- Matt black powder-coated steel frame and legs
- Foam and strapping cushioning
- 100% polyester (Orion weave) in Black
- Also available in Natural
- 47.5 cm seat height suits standard-height dining tables
- Arrives fully assembled no tools required
- Rated to 120 kg
- Frame: matt black powder-coated steel
- Cushioning: foam and strapping
- Upholstery: 100% polyester (Orion weave)
- Colour (this listing): Black
- Also available in: Natural
- Max weight capacity: 120 kg
- Assembly: fully assembled
| Overall | W59.5 × D57 × H77.5 cm |
|---|---|
| Seat height | 47.5 cm |
| Product weight | 12.2 kg |
| Max weight capacity | 120 kg |
Comfort at a glance: Medium seat feel · Seat height 47.5 cm (standard dining pairing).
1 Year warranty.
1 carton
Carton: 62 × 59 × 73 cm, 18 kg
Fully assembled.
What’s the seat height will it pair with a standard dining table?
The Dalca seat sits 47.5 cm off the floor. That’s within the standard dining-chair range for tables with a top height of roughly 74 76 cm measure your table’s apron depth and aim for around 25 30 cm of clearance between the seat and the underside of the tabletop.
What’s the frame made of?
The frame and legs are matt black powder-coated steel. The seat and backrest are upholstered in soft textured polyester (Orion weave) over foam and strapping cushioning.
How do I care for the upholstery?
Treat spills and stains promptly by blotting with a clean, dry cloth. Avoid rubbing, and cut loose threads rather than pulling them. Keep the chair out of direct sunlight and away from heat sources to prevent fading. Vacuum regularly to maintain fabric condition. Slight colour variations may occur between dye lots.
Does the Dalca need assembly? Does it stack?
No assembly required the Dalca arrives fully assembled. The master product details don’t specify whether the chair is stackable, so plan storage as for a standard four-leg dining chair.
- Description
- Features
- Specification
- Dimensions
- Warranty
- Shipment Contains
- FAQs
Pull up a chair at the Dalca a softly curved dining chair in black textured fabric, grounded on a slim matt black steel frame. At 59.5 cm wide by 57 cm deep, with a seat sitting 47.5 cm off the floor, it pairs with a standard-height dining table and suits a formal dining room or a modern-dark kitchen setup.
Upholstered in soft textured fabric with a curved backrest and generous seat. Supported by a sleek matt black powder-coated steel frame and legs, with foam and strapping cushioning. Fully assembled.
Curved backrest, generous seat
The backrest curves gently around the shoulders, and the seat pad runs the full width of the chair. Foam-and-strapping construction gives everyday support without feeling boardroom-firm.
Matt black powder-coated steel frame
The four-leg frame is matt black powder-coated steel slim in profile, dark in finish, and the tonal match to the black upholstery reads sharp and architectural.
Black confident and formal
Monochrome black reads confident against pale timber, stone, or marble table tops. A grown-up choice for a formal dining room or a high-contrast modern kitchen.
- Curved backrest and generous seat in soft textured fabric
- Matt black powder-coated steel frame and legs
- Foam and strapping cushioning
- 100% polyester (Orion weave) in Black
- Also available in Natural
- 47.5 cm seat height suits standard-height dining tables
- Arrives fully assembled no tools required
- Rated to 120 kg
- Frame: matt black powder-coated steel
- Cushioning: foam and strapping
- Upholstery: 100% polyester (Orion weave)
- Colour (this listing): Black
- Also available in: Natural
- Max weight capacity: 120 kg
- Assembly: fully assembled
| Overall | W59.5 × D57 × H77.5 cm |
|---|---|
| Seat height | 47.5 cm |
| Product weight | 12.2 kg |
| Max weight capacity | 120 kg |
Comfort at a glance: Medium seat feel · Seat height 47.5 cm (standard dining pairing).
1 Year warranty.
1 carton
Carton: 62 × 59 × 73 cm, 18 kg
Fully assembled.
What’s the seat height will it pair with a standard dining table?
The Dalca seat sits 47.5 cm off the floor. That’s within the standard dining-chair range for tables with a top height of roughly 74 76 cm measure your table’s apron depth and aim for around 25 30 cm of clearance between the seat and the underside of the tabletop.
What’s the frame made of?
The frame and legs are matt black powder-coated steel. The seat and backrest are upholstered in soft textured polyester (Orion weave) over foam and strapping cushioning.
How do I care for the upholstery?
Treat spills and stains promptly by blotting with a clean, dry cloth. Avoid rubbing, and cut loose threads rather than pulling them. Keep the chair out of direct sunlight and away from heat sources to prevent fading. Vacuum regularly to maintain fabric condition. Slight colour variations may occur between dye lots.
Does the Dalca need assembly? Does it stack?
No assembly required the Dalca arrives fully assembled. The master product details don’t specify whether the chair is stackable, so plan storage as for a standard four-leg dining chair.
Description
- Description
- Features
- Specification
- Dimensions
- Warranty
- Shipment Contains
- FAQs
Pull up a chair at the Dalca a softly curved dining chair in black textured fabric, grounded on a slim matt black steel frame. At 59.5 cm wide by 57 cm deep, with a seat sitting 47.5 cm off the floor, it pairs with a standard-height dining table and suits a formal dining room or a modern-dark kitchen setup.
Upholstered in soft textured fabric with a curved backrest and generous seat. Supported by a sleek matt black powder-coated steel frame and legs, with foam and strapping cushioning. Fully assembled.
Curved backrest, generous seat
The backrest curves gently around the shoulders, and the seat pad runs the full width of the chair. Foam-and-strapping construction gives everyday support without feeling boardroom-firm.
Matt black powder-coated steel frame
The four-leg frame is matt black powder-coated steel slim in profile, dark in finish, and the tonal match to the black upholstery reads sharp and architectural.
Black confident and formal
Monochrome black reads confident against pale timber, stone, or marble table tops. A grown-up choice for a formal dining room or a high-contrast modern kitchen.
- Curved backrest and generous seat in soft textured fabric
- Matt black powder-coated steel frame and legs
- Foam and strapping cushioning
- 100% polyester (Orion weave) in Black
- Also available in Natural
- 47.5 cm seat height suits standard-height dining tables
- Arrives fully assembled no tools required
- Rated to 120 kg
- Frame: matt black powder-coated steel
- Cushioning: foam and strapping
- Upholstery: 100% polyester (Orion weave)
- Colour (this listing): Black
- Also available in: Natural
- Max weight capacity: 120 kg
- Assembly: fully assembled
| Overall | W59.5 × D57 × H77.5 cm |
|---|---|
| Seat height | 47.5 cm |
| Product weight | 12.2 kg |
| Max weight capacity | 120 kg |
Comfort at a glance: Medium seat feel · Seat height 47.5 cm (standard dining pairing).
1 Year warranty.
1 carton
Carton: 62 × 59 × 73 cm, 18 kg
Fully assembled.
What’s the seat height will it pair with a standard dining table?
The Dalca seat sits 47.5 cm off the floor. That’s within the standard dining-chair range for tables with a top height of roughly 74 76 cm measure your table’s apron depth and aim for around 25 30 cm of clearance between the seat and the underside of the tabletop.
What’s the frame made of?
The frame and legs are matt black powder-coated steel. The seat and backrest are upholstered in soft textured polyester (Orion weave) over foam and strapping cushioning.
How do I care for the upholstery?
Treat spills and stains promptly by blotting with a clean, dry cloth. Avoid rubbing, and cut loose threads rather than pulling them. Keep the chair out of direct sunlight and away from heat sources to prevent fading. Vacuum regularly to maintain fabric condition. Slight colour variations may occur between dye lots.
Does the Dalca need assembly? Does it stack?
No assembly required the Dalca arrives fully assembled. The master product details don’t specify whether the chair is stackable, so plan storage as for a standard four-leg dining chair.
